The items on this page are quite profitable, especially badges. They can be as simple or fancy, as the company wants to pay for. The one shown is a slipover pocket protector holder, with a 1x3 sublimated plate taped on.

That same 1x3 plate, with a pin-back fastener on the back becomes a standard badge. Customers will also pay a premium for a magnetic bar fastener. On metal badges it is a good idea to put a slight radius on the corners.

The buttons are actually 1.5" and 2" pre-cut discs, with a pin-back fastener. This are usually wanted for special events, conventions, etc.

Magnetic note holders can be a very steady little profit builder (see "Success Stories"). You can even give them away for self-promotion. A 4x6 costs about $0.30.

If you have gone through all the pictures, we will close the section with these bold statements.

There are almost endless opportunities with single color laser sublimation. While you may well add full color sublimation to your product mix later, adding single color sublimation to your abilities now, is an almost "can't fail" proposition.

About the only way we can think of you failing, is if you were smart enough to get into it, but dumb enough to leave it in the box, after you got it.

Back